Fog Light Overlays - 2025+ 4Runner

Amber Acrylic Version 2

$24.99

Fog Light Overlays - 2025+ 4Runner

$24.99

Acrylic V2 clips in — no adhesive, no tools, reversible in seconds
Vinyl version — wet install, conforms to any lens, extra backup set included
6 acrylic colors: Amber, Yellow, Smoked, Purple, Prismatic Pink, Green
4 vinyl options: Amber, Deep Amber, Yellow, Dark Smoke LX+
Fits 2025+ 4Runner SR5, TRD Sport, TRD Off-Road, Limited — and 2024+ Tacoma SR/SR5, TRD Sport, TRD Off-Road, Limited
⚠️ Not compatible with RIGID lamps (Pro / Trailhunter) without modification
Sold as a pair

Fog Light Overlays — 2025+ 4Runner

Two ways to tint your fogs. Clip-in acrylic or wet-apply vinyl — same result, different install.

Fog Light Overlays installed on 2025+ Toyota 4Runner

Two Versions, One Goal

These fog light overlays are precision-made for the 2025+ Toyota 4Runner factory fog light housings. They change both the light output color and the daytime lens appearance — giving the front end that amber, yellow, smoked, or tinted look without touching the wiring or the bulbs.

You choose the format based on how you want to install:

Acrylic V2 ($24.99) — hard lens, clips directly into the factory housing. No adhesive. Clips directly in, no tools.
Vinyl ($9.99–$13.99) — thin film applied wet to the lens surface. Conforms to any shape. Extra backup set included.

Fitment is identical between the 2024+ Tacoma and 2025+ 4Runner — verified by us. Shop the Tacoma listing here.

Acrylic V2 vs. Vinyl — Which Should You Choose?

	Acrylic V2	Vinyl
Install method	Clips in — no adhesive, no tools	Wet apply to lens surface
Reversible?	Yes — clip out anytime	Yes — peel off cleanly
Daytime look	Bold, dimensional lens color	Tinted film over factory lens
Colors	Amber, Yellow, Smoked, Purple, Prismatic Pink, Green	Amber, Deep Amber, Yellow, Dark Smoke LX+
Price	$24.99	$9.99 – $13.99
Extra set included?	—	Yes — backup pair included
Best for	Clean look, quick swap, no mess	Budget-friendly, any lens shape

Acrylic V2 Color Options

Amber	Yellow	Smoked
Purple	Prismatic Pink	Green

Prismatic Pink looks amber/orange during the day and shifts to pink at night. Smoked creates a stealthy dark look during the day while still transmitting light at night.

4Runner fog light before overlay comparison

4Runner fog light after overlay installed

4Runner amber fog light overlay at night

Installation Videos

Overview — all styles

Acrylic V2 clip-in install

Color comparison

Prismatic Pink in action

Acrylic V2 — Installation

Clean the original lens. Slip the bottom tabs behind the bumper cover, then press the top in — all 4 tabs should be seated behind the plastic. To remove, apply upward pressure on the bumper cover and work the piece back out in the reverse direction. Remove the protective paper last.

Vinyl — Installation

Clean the lens surface with wax-free detailer. Use StickerFab Application Fluid or 1 drop dish soap in a cup of water. Spray both the vinyl and the lens. Slide into position, squeegee from center out. Apply light heat to edges if needed. Allow to dry in sun.

The extra set can be saved as a backup or layered on top for a darker tint.

FAQ

Will these fit the 2024+ Tacoma? Yes — the fog light housing is identical. Shop the Tacoma listing here.	Are these compatible with RIGID aftermarket fogs? No — the Acrylic V2 will not fit RIGID Pro or Trailhunter lamps at all. The housing geometry is completely different and there is no modification that will make it work. Vinyl versions can potentially be made to fit but would require trimming to size.
Which color gives the most amber output? Standard Amber gives saturated amber output. Deep Amber vinyl is even more intense. The tradeoff is slightly reduced raw brightness.	What does Prismatic Pink look like? Amber/orange during the day, shifts to pink at night. It's the most unique option — looks different in different lighting conditions.
What does Smoked look like at night? Stealthy dark during the day, still transmits light at night — output is reduced but not dramatically. Best if you want fogs to disappear into the bumper.	Which trims are compatible? 4Runner: SR5, TRD Sport, TRD Off-Road, Limited. Tacoma: SR/SR5 (factory fogs required), TRD PreRunner, TRD Sport, TRD Off-Road, Limited. Not compatible with Pro / Trailhunter RIGID lamps.